Hangzhou Transcend Consulting Co., Ltd : Archives

S	M	T	W	T	F	S
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	31

« 2004-11 | HomePage | 2005-01 »

27/12/2004

SRRC Type Approval System

Radio and non-radio telecommunications equipment are covered by the type approval scheme of the Ministry of Information Industry (MII). Bureau of Telecommunications Administration (BTA) and State Radio Regulatory Commission (SRRC) are two departments of MII and are responsible for Network Access Licensing and Frequency allocation, respectively. As the result of the overlapping responsibilities, telecommunications equipment needs a CCC mark, in addition to the Network access license from the BTA and radio type approval from the SRRC.

There are currently 27 types of radio equipment under SRRC regulation as listed below.

______________________________________________

GSM 900-1800 dual-band digital cellular mobile station
GSM 900-1800 dual-band cellular base station
GSM transmitters
800-MHz CDMA cellular mobile station
800-MHz CDMA cellular base station
FM transceiver
Wireless paging transmitter
Analog hierarchy system base station and mobile station
Digital hierarchy system base station and mobile station
Point-to-point spread-spectrum equipment
26-GHz LMDS broadband wireless access equipment
3.5-GHz wireless access equipment
2.4-GHz short-range devices
Fixed satellite earth station equipment
Digital transmission radio station
Digital microwave communication repeater
PHS wireless access system
DECT wireless access system
Cordless phone
Maritime satellite earth station
SSB equipment
Low-power wireless devices
FM broadcasting transmitter
AM broadcasting transmitter
TV broadcasting equipment
Multiple-channel microwave system
______________________________

Testing of radio communications equipment is conducted primarily in the SRRC test facility, although in some special case external data may be accepted at the SRRC’s discretion. The MII & SRRC has just published a new book " PEOPLE'S REPUBLIC OF CHINA Regulations on the Radio Frequency Allocation"(Figure 1). The book specified the "Frequency Allocations The Radio Spectrum"(Figure 2) in detail. We could purchase a hard copy for you.

Figure 1

Figure 2

Our Client

00:55 Posted in Global Approval | Permalink | Comments (0) | Trackbacks (0) | Email this

16/12/2004

Cooperation

Elliott Labs - An EMC and product safety compliance engineering service provider located in Silicon Valley

York EMC Services Ltd - A leading, independent provider of EMC testing, consulting, training, and products in the UK. Accredited by UKAS, DTI, FCC, VCCI, IEE and employing a team of highly qualified engineers, York EMC Services also has access to the University of York - the largest cohort of EMC researchers in the UK.

EMC Compliance Club - An Online Compliance Club provide you EMC Compliance Journal, EMC Filters Directory
and EMC & Compliance Test Labs Directory.

EMC Technologies Pty Ltd - EMC Technologies is the most accredited independent EMI/EMC testing house in Australia.

D.L.S. Electronic Systems, Inc.- a full service EMC/Safety Testing Laboratory offering testing, consulting, and problem solving for domestic, international, and military regulations. D.L.S. Is also accredited to ISO Guide 17025 and is a U.S. CAB (Competent/Notified Body) for the European EMC and R&TTE Directive.

NEMKO (Norges Elektriske Materiellkontroll) - Nemko provides access to worldwide markets for radio, telecom, medical, industrial, information technology equipment, and many more product categories. Nemko is a NCB for CB Scheme reports. Contact me directly to review our services and how we may be able to help. Offices in North America (USA and Canada), Europe, and all major markets.

LabTest - with positive working relationship with ULC for Electrical/Electronic Equipment Certification, we can help you to get your devices certified for the USA and Canadian markets, plus the European Union (CE Marking) in timely and cost effectively.

MIKES BABT PRODUCT SERVICE - Succeed with your accredited partner for testing and certification of electrical/electronical equipment. EMC, TELECOM, SAFETY.

Washington Laboratories - provides testing for United States and Europe. One stop approvals for FCC, Europe, Canada, for EMC, Safety and Wireless Certification Services.

Aeroflex - “Qualifies and sells space and radiation hardened semiconductors, including FPGAs.”

Ergonomics, Inc - Offers products and services for you to meet regulatory compliance, product safety standards and liability issues governing all facets of product design, manufacture and delivery.

Marstech Limited - An electronics testing organization specializing in Approvals management. We have the ability to conduct CSA, UL, FCC and IC testing. Accredited with CSA, UL, FCCand IC as a Qualified Test Facility for North American approvals. Working with Agencies forSafety and Telecomm Approvals since 1976.

Powertech Labs Inc - Provides testing, consulting, certification and research services to utilities,their customers and suppliers. Enabling the Hydrogen economy by working with manufacturers to develop safe and efficient storage systems for H2.

Accurate Consultants, Inc. - Accurate FDA Consultants are Quality, Regulatory, and Compliance experts and leaders in resolving US and International Regulatory and Quality Requirements. We assist clients with a variety of FDA issues including the medical device registration and listing process, 510(k), IDE , and PMA submissions, and resolving all FDA compliance problems (FDA 483 and Warning Letters)

20:20 Posted in Cooperation | Permalink | Comments (0) | Email this

年度技术服务

创见咨询在产品认证代理服务的基础上，为广大客户提供更为全面的技术服务，欢迎随时联系，我们愿竭诚为您服务！

基本年度服务：

· 提供最新国际标准、专利文献的查询，并代为购买

· 协助寻找合格的认证零部件供应商

· 处理工厂审核中的不符合报告VN

· 工厂审查，进出口许可方面的技术支持

· 年度FUS – Service

认证年度服务：

· 与认证机构&实验室协商获得优惠报价

· 确认测试项目&安排摸底测试。

· 确认产品结构&关键零部件

· 产品安全设计服务（SCDS）

· 协助寻找国外采购商&获得OEM机会

欲了解更多信息,请联系：

国际认证部
杭州创见信息咨询有限公司
Tel: 0571-28812208
Fax: 0571-87530692
Email: hbw@zgb.com.cn

02:20 Posted in Our Service | Permalink | Comments (0) | Email this

13/12/2004

Implementation Rules and Regulations

03:10 Posted in Useful Resources | Permalink | Comments (2) | Email this

01/12/2004

Typical Answer to the Questions Related to Compulsory Product Certification (CCC) System

Following are some typical Asked Questions about the China Compulsory Certification (CCC) system:

1. Q: Is it necessary for export product to obtain CCC approval?
A: For those products specially produced according to foreign trade contract, there is no need to apply for CCC certification. But the remained products for certain reason will be forbidden to sell in the market unless they obtain CCC approval.

2. Q: For those components used in the appliance and listed separately in the First Catalogue of Product Subject to Compulsory Product Certification (hereafter Catalogue), is it necessary to obtain CCC approval?

A: If the whole appliance is listed in the Catalogue, it is welcome for the components used in it and listed in the Catalogue as well to apply for CCC certification separately; but it is acceptable for them to only test with the appliance; If the whole appliance is not listed in the Catalogue, there is no need to apply for CCC certification if the components used in the appliance are not exported and sold separately, and it necessary to obtain CCC approval if the components are exported or sold separately and they are listed in the Catalogue at the same time.

3. Q: What are the conditions to recognize the CB Test Certificate? If the appliance has got CB Test Certificate, will the components used in it be subject to test or any other requirement?
A: The conditions to recognize the CB Test Certificate includes:

(a). The standards used in the CB Test Certificate should be within the scope that China has promised to recognize

(b). Valid CB Test Report (within three years, CB Test Certificate + CB Test Report)

(c). The product name, model and specifications, manufacturer and factory listed in the CB Test Certificate must be the same with or cover those given in the application for CCC certification

(d) CNCA or Certification Body reserve the right to check and test according to the national difference. The components used in the appliance shall be recognized, but the right to check is reserved as well.

4. Q: Can the manufacturer with ISO9001 certification be avoiding of factory inspection for Compulsory Product Certification?

A: No. Factory inspection for Compulsory Product Certification has some quality system requirements as a part, but the more important part is the specific requirements for production process control, inspection and check of consistency of the product. For those manufacturers have got ISO9001 certification issued by the certification body authorized by CNCA, it is acceptable to simplify the inspection for quality system.

5. Q: Is it possible for foreign organizations to be designated as certification body, testing body or inspection body for China Compulsory Product Certification?
A: CNCA will not designate the foreign organization directly. But the foreign certification or testing bodies may carry out relevant business through mutual or multilateral agreement.

6. Will the voluntary certification results of a component be recognized if the component is subject to test with the appliance according to the Implementation Rules of Compulsory Product Certification?

A: If the component has been certified by the certification body approved or by CNCA, the designated certification body shall recognize the certification result. There should be no repeat of testing.

7. Q: How to get the catalogue of product subject to certification relevant to HS code and how to find the answer to questions about the scope of the product subject to CCC certification?
A: CNCA and AQSIQ issued jointly detailed catalogue of product subject to certification relevant to HS code (Announcement No. 60 by AQSIQ and CNCA). Those who have questions about the scope of the products subject to CCC certification shall enquiry to CNCA in writing form and CNCA will reply accordingly.

8. Q: What is general requirements or procedure for certification

A: (1) Prepare application documents and submit application for certification
(2) Conduct type testing
(3) Prepare Initial inspection of the factory
(4) Evaluation of certification results and approval of certification
(5) Obtain the Certificate
(6) Meet with the Follow-up inspection criteria

02:25 Posted in Global Approval | Permalink | Comments (0) | Email this

Hangzhou Transcend Consulting Co., Ltd

Update information of China Compulsory Certification; China Type Approval, Network Access License

Categories

July 2008

Recent Posts

Recent Comments

Archives